You must learn how to install SSD if you want to increase the overall speed of your PC. Installing SSD in your desktop computer is an essential part of every PC built. In simple words, replacing or upgrading your storage device can make your PC feel faster. In today’s post, I will teach you how to install SSD on a PC. This task can be easily done by yourself right at home. Make sure you grab your system owner’s manual, a screwdriver, and then follow our simple installation guide. If you want to find out how to install SSD, you can keep on reading further.
How To Install SSD?
Follow these steps to learn how to install SSD.
- Before you start make sure you’re working in a static-safe environment.
- Now, gather all the necessary supplies such as SSD, screwdriver, and manual.
- Turn off the computer system and unplug the power cable.
- Make sure you hold down the power button for 5 seconds to discharge residual electricity.
- Referring to your system manual, open the desktop case.
- Find the exact location of the storage bay to note down its size.
- Then, plug the SSD into your system.
- You can use a SATA cable to install the SSD as a secondary drive.
- Attach one end of the cable to your motherboard and the other end to the SSD.
- Next, use an available SATA power cable from your system’s power supply.
- Connect this cable to your SSD.
- Then, fasten the SSD down by screwing a tiny screw.
- Once you’re done, reassemble your desktop.
- Lastly, power on your computer as the SSD is installed.
Remember that some storage bays and hard drives are larger than a standard-size SSD. So, you’ll need a 2.5 inches to 3.5 inches converter to fit the SSD. During this process, make sure you ground yourself by touching an unpainted metal surface.
You can keep on reading further to know more about how to install SSD on Windows 10.
How To Install M.2 SSD
The M.2 SSD looks like a chewing gum stick which consists of a chip on one side and a label on the other side. This device comes with its own heat sinks and has gold contacts at one end.
You can follow these steps to learn how to install M.2 SSD on your device.
- Turn off the computer system and unplug the power cable.
- Make sure you hold down the power button for 5 seconds to discharge residual electricity.
- Referring to your system manual, open the desktop case.
- Now, find where the M.2 slot is on your motherboard.
- Once you find the slot, find a screw about three inches to the left into a standoff.
- Grab a screwdriver and unscrew the screw from the standoff.
- Make sure you keep the screw somewhere safe during installation.
- Now, insert the M.2 SSD driver with the brand’s label side up.
- The edge with the semi-circle notch must be placed in the place of the screw.
- Remember the edge with gold contact points is what we insert into the M.2 slot.
- Next, insert the drive firmly at about a 15-degree angle and let go.
- Keep holding the drive flat, insert the screw and tighten it.
- Make sure you don’t overtighten or you’ll end up damaging the motherboard.
- Once you’re done, reassemble your desktop.
- Lastly, power on your computer as the SSD is installed.
Even though every motherboard is different, you’ll find M.2 slot below the CPU and around the PCIe slots. The standoff is there in the M.2 slot because when the drive is inserted, there will be a gap between SSD and motherboard.
Let us now move forward to learn how to install SSD(2.5 Inch SATA SSD).
Click here – How To Install SIM Card In iPhone And Android?
How To Install 2.5 Inch SSD
A 2.5-inch SSD needs only three things for installation: a power cable, a SATA cable, and a place to sit inside your PC! You can follow these steps to learn how to install a 2.5-inch SSD.
- Turn off the computer system and unplug the power cable.
- Make sure you hold down the power button for 5 seconds to discharge residual electricity.
- Referring to your system manual, open the desktop case.
- Find the exact location of the storage bay to note down its size.
- Then, insert the 2.5 SSD into the storage bay.
- Make sure you don’t apply much force into the storage bay.
- To install the SSD as a secondary drive, you must use a SATA cable.
- Now, attach one end of the SATA cable to your SSD.
- Next, take the SATA power cable of your system and connect it to your SSD.
- Once you’re done, reassemble your desktop.
- Lastly, power on your computer as the SSD is installed.
You can follow the same procedure to know how to install SSD on a laptop. Remember that you must remove the laptop battery and hold the power button for five seconds to discharge any residual electricity.
Install SSD On PC Without Reinstalling Windows
The process of installing SSD on a desktop without reinstalling Windows is a little different. You can follow these steps to find out how to install SSD on a PC without reinstalling Windows.
- First, install and launch AOMEI Partition Assistant Professional.
- From the main console, navigate to Clone.
- Select Disk Clone from the next page.
- Then, select the current system drive as the source disk.
- Make sure you select the new SSD as the destination disk.
- Select the Start Clone option to execute the operation.
- Wait for a while till the process completes.
- Your laptop will shut down automatically once the process is completed.
- Unplug the power cable and remove its battery.
- Make sure you hold down the power button for 5 seconds to discharge residual electricity.
- Referring to your system manual, open the desktop case.
- Now, find the hard drive and uninstall it using a screwdriver.
- Install a new SSD in that place and connect each interface accordingly.
- Make sure you secure it with the screws you removed before.
- Once you’re done, reassemble your laptop.
- Lastly, reboot your laptop as the SSD is installed.
To reboot your laptop from SSD Drive, press ESC, F1, F2, F8, or F10 during the initial setup. Once the Boot menu appears, select options using the arrow keys.
If you want to find out how to install SSD in PlayStation, then keep on reading.
How To Install SSD In PS5
In this section, I will discuss how to install SSD in PS5.
- Before you start, make sure you have got the right SSD for PS5.
- Also, confirm that your PS5 is updated to the latest firmware version.
- Shut down your console to remove the base and all attached cables.
- Keep the PS5 with the PS logo downwards and the power button away from you.
- Make sure you keep the device on a soft surface to avoid scratching the top panel.
- Remove the lower panel by lifting it from the bottom right corner.
- Using a screwdriver, remove the expansion cover from the slot.
- You can now see inside the expansion bay.
- Gently remove the screw in the end slot and place it on one side.
- Hold the rear edge of your SSD to align it with the notch on the terminal.
- From a diagonal position, insert it in PS5.
- Press inserted SSD downwards to lock it in place above the spacer.
- Reattach the expansion cover using a screwdriver.
- Lastly, reattach the base and all cables then power it up.
Once you’ve successfully installed SSD in your PS5, you can transfer your existing games and apps into the new storage.
You can keep on reading to check out how to install Windows onto a new SSD!
If you want to know more topics like these visit Installmo
FAQ
Can I Install A SSD Myself?
You can install a Crucial SSD yourself in minutes.
As such, most computer manufacturers design their systems in a way that makes it easy and user-friendly to install a new storage drive.
Is Installing SSD Hard?
SSDs are no more difficult to install than a hard drive either; in fact, they’re often easier. Most modern PC cases come dotted with mounting points for 2.5in SSDs, usually in more accessible spots than the 3.5in cages typically used for holding HDDs, and if you opt for a slimmer M.
Can You Install SSD In Any PC?
What type of SSD is supported by my PC? To make sure which SSD fits in your device, find your PC’s model number or check your device’s manual. Most devices support 2.5-inch SSDs, so that’s usually a safe choice. If you want to install an SSD on your motherboard, first check which connectors your motherboard has.
Where Do I Put My SSD In My Computer?
Look for a slot about one inch wide that protrudes from the motherboard about a quarter of an inch. Every motherboard is different, but the most common locations are below the CPU and around the PCIe slots in the lower half of the board.
Do You Need To Change BIOS When Adding SSD?
No, not usually. The SSD is recognized the same as a mechanical HD. The only change you might make is, if you’re going to run both, make sure the SSD is set to first hard drive boot device as that’s the drive you’ll want to boot from.
Click here – How To Install Fonts On Mac?
What Do I Need To Do Before Installing A New SSD?
Remove your old drive and disconnect any cables and brackets attached to it. Don’t force the connection – it should plug in easily and fit snugly. To install the SSD as a secondary drive (not your primary or boot drive), use a SATA cable and attach one end of the cable to the SATA connector on your motherboard.
How Do I Connect My SSD To My Computer?
Don’t force the connection – it should plug in easily and fit snugly. To install the SSD as a secondary drive (not your primary or boot drive), use a SATA cable and attach one end of the cable to the SATA connector on your motherboard. Attach the other end of the SATA cable to your Crucial SSD.
Why Is My PC Not Detecting My SSD?
The BIOS will not detect a SSD if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.
Conclusion
In the above post, I’ve explained how to install SSD on a motherboard in detail. The entire process of installing SSD on a Windows PC is quite easy! You can save your underperforming PC or laptop by upgrading to an SSD. This task can be done by using a screwdriver and your system manual. During this installation process, make sure you don’t apply too much pressure otherwise you’ll damage the motherboard. You can also use a professional disk cloning software named AOMEI Partition Assistant Professional to install SSD without reinstalling. Once you understand how to install SSD, you can effortlessly replace your storage device.
To Know Some Great Stuff Do Visit IncludedNews
To Know Some Great Stuff Do Visit IndiaPlus
To Know Some Great Stuff Do Visit InfoDeath
To Know Some Great Stuff Do Visit JetFamous
To Know Some Great Stuff Do Visit JobEngg